Stauf Cold PVA Glue D3 Adhesive 750ml

FULL DESCRIPTION 

Stauf Cold PVA Glue D3 is a professional-grade, water-based adhesive specifically designed for bonding the tongue and groove joints of floating wood floors, engineered flooring and laminate. Made by Stauf — one of the most trusted names in professional wood flooring adhesives — it delivers the same German engineering quality as their full adhesive range in a simple, easy-to-use bottle format.

Solvent-free and ready to use straight from the bottle, it sets quickly, dries completely transparent, and meets D3 water resistance classification under DIN EN 204 — making it suitable for areas with occasional moisture exposure such as kitchens and hallways.

Applied to the top of the tongue and the lower cheek of the groove before pressing boards together, it creates a tight, clean joint bond that prevents gapping and creaking developing over time. Any excess is easily removed with a damp cloth before setting — no mess, no residue.

Compatible with softwood, hardwood and exotic timber species. Each 750ml bottle covers approximately 16m² of flooring joints — enough for a typical bedroom or living room installation in one bottle.

A small but important product — using a quality PVA on tongue and groove joints is one of the most overlooked steps in a floating floor installation, and one of the easiest ways to prevent squeaking and joint movement in years to come.

KEY FEATURES 

• D3 water resistant classification — DIN EN 204

• Water-based and solvent-free — safe for indoor use, no fumes

• Dries completely transparent — no visible residue at joints

• Fast setting — ready in approximately 9 minutes at 20°C

• Easy squeeze bottle application direct to tongue and groove

• Excess removed easily with a damp cloth before setting

• Compatible with softwood, hardwood and exotic timber species

• No metal contact — use plastic applicator or direct from bottle

• 750ml bottle covers approximately 16m² of flooring joints

• By Stauf — Germany's leading wood flooring adhesive brand

SPECIFICATIONS

Volume: 750ml Coverage: Approximately 16m² Type: PVAc D3 water-based adhesive Brand: Stauf Water resistance: D3 class — DIN EN 204 Setting time: Approximately 9 minutes at 20°C Suitable for: Engineered wood, solid wood T&G, laminate flooring Not suitable for: Glue-down direct to subfloor installations

HOW TO USE 

For laminate flooring: Apply glue to the top of the tongue of the installed board and to the lower cheek of the groove of the board to be added, on both side and front end joints. Press together firmly until glue oozes out over the complete joint length. Remove excess immediately with a damp cloth.

For engineered wood and chipboards: Apply glue over the complete length of both top and bottom of the tongue. Press together firmly. Remove excess with a damp cloth.

Important: Do not allow glue to contact metal. Use plastic, glass or ceramic containers only. Avoid using rusty brushes